Moving along in my adventure with my Home Theatre PC I decided to add in support for my D-Link DCS Wireless Cameras. Here are the steps that I took in order to get that online.
1. Install the Cameras, and configure them appropriately.
2. (Optional) Install the WHS Add-In [More Info]. This allows for Snapshot/Video storage.
3. On your HTPC, run the D-Link D View Cam installation [Direct Download], [Product Page] (See bottom of this post for v3 Info)
4. Walk through the wizard to find and setup your Cameras in the software. Since I changed the passwords on each camera, I had to set each individually once the Wizard found both of them.
Here is a preview of my setup:
Side Note: If you didn't notice I actually switched from RDP administration for the HTPC over to UltraVNC. I really didn't like how RDP forces the desktop (on the TV) to log off.
5. Next step is to configure your remote to work with EventGhost to essentially Task Switch over to the Dlink View Application. Not covered here is the Logitec remote control setup, but if you are familiar with that application then choose a spare button and map that into EG. I chose Yellow, with a name of “Security”.
In EventGhost, I created a new Macro, (Launch Application), and pointed it to: “C:\Program Files\D-Link\D-Link D-ViewCam\Bin\DVC2.0.exe” and a working directory of “C:\Program Files\D-Link\D-Link D-ViewCam\Bin\”
Maximized window, normal priority.
Now, on your remote point it at your IR Receiver and press the button which you programmed in for “Security”. It should show up in the Log on the left of EventGhost.
Click and drag that new event into the new Macro we just created. Binding that event to the action which we want it to take.
Note: You may also want to add a “Find Window”, “Bring to Front”, and Maximize actions in that Macro as well. Force it be front and center.
Last minute update…
After looking around for more information on the DLink D-View Cam software I managed to stumble upon their forums, and specifically one discussion for version 3 of the Software. Download v3 here, Manual.
In order to get this running, I first exited the application (right click the system tray icon, exit) and then uninstalled the v2 software and ran the v3 installation. I love the Single Video, Full Screen and Auto Scan set to 5 seconds.
Don't forget to update EventGhost to point to the new install.
Here is the Screenshot for v3.
[backup] [reboot] [test]
Its as easy as that to add Security Monitoring to your Home Theater Experience!
I managed to get round one completed for integrating Skype into my Home Theater Experience. Here are the steps:
1. Install the Microphone and Web Camera onto the HTPC
Note: You might want to grab a decent quality Web Camera, especially if your using it in a larger living room/viewing space.
2. Install Skype and use its wizard to setup the hardware integration, full with Speakers, Microphone and Web Camera. I setup a new/free account for this machine. Since all of my calls will be incoming and from the Skype network (friends and family) the free account is perfect.
3. In Skype, to go Tools, Options, and in the Advanced tab, Choose “HotKeys”. In HotKeys “Enable Keyboard Shortcuts” should be checked, and “Answer Call”, “Answer Call with Video” and “Hang Up” all should be checked as well. Take note of each Hotkey listed in the grid.
Save your changes and minimize the Skype Application.
4. Next we will need to have EventGhost to respond to your custom commands from your remote, and relay those to the custom Skype HotKeys. Here is my EG setup:
Take note in the above screen shot about Starting Skype, responding to the Blue button on my Remote, and the Green is set to Start XBMC. This allows me to task switch between the two applications.
I also have the “Maximize Skype” node which will detect whenever Skype starts or the Window becomes activated which will in turn maximize that Window. This is used for full screen viewing during Video Calls.
Finally the last two macros for Answering and Hang Up of Skype are mapped to custom buttons on my Logitec (you can use whichever buttons you like for this).
“Answer Skype via Hotkeys”, includes the HotKeys of: {Ctrl+Alt+PageUp} and if you do NOT have video you can use {Alt+PageUp}
“Hang Up Skype via Hotkeys”, includes the HotKeys of: {Alt+PageDown}
[7:30PM]
With the recent update to the XBMC bits related to Windows and support for GPU rendering I decided to take the plunge and convert my XBMC Home Theatre PC (HTPC) to use Windows 7 as its foundation, and XBMC on top of it. This post is intended to outline the experience I had with the migration.
My previous build included using the Live USB Linux (Ubuntu) based version, booting from a USB Stick with a local file store on the USB drive. I still love this idea but I think the advantages of moving to a Windows platform outweigh need to keep with the Live USB boot.
The biggest motivation, for me, is the fact that it will play nice with my Windows Home Server (WHS). WHS has the ability to remotely wake up and backup target machines in your network. Another motivation is, based on those backups, you can roll back changes made to any back up. And finally the fact that I’m ultimately a windows guy using Windows 7 is just an added plus for me (.NET Development, the wider range of Applications available, etc.).
For this installation I will be using a Mouse and Keyboard. Windows loves the dependency on both, but the expectation that once setup both should go back into the closet.
Hardware Upgrade
So, let’s get started.
My hardware platform, documented here, is slightly upgraded to include a 500GB SATA 7200RPM Drive. Absolutely no special reason for choosing this drive other than it fits within my enclosure and I had it sitting, unused, in my basement. Bonus!
Installation of the drive is a snap, just plug it into one of the 3 available SATA Ports on the motherboard and your done.
Preparing the Install Media
Since there is no DVD drive in my unit I will need to install the Windows 7 Boot to USB. For this you will first need to download the “Windows 7 USB/DVD Download Tool” [direct download] [source, etc.].
Install it, and execute…
Follow the tool’s wizard interface to build your USB Drive with your valid Windows 7 installation.
If you are having issues with your drive, it may be useful to dump to DOS and use the DiskPart command to manage the partitions and set the disk up as you see fit. For example, I’m using a drive which had 3x950MB Partitions. I had to first remove them all, create a new partition, full size and set it as primary. Once that was all done I was able to format it and use it.
Please Note: I’m using a SanDisk Titanium Cruzer, 4.0GB in size. The ISO itself for Windows 7 is 2.32GB, so I would recommend using at least a 4.0GB drive to work with.
Now that you have your USB Drive loaded with Windows 7, pop it into your USB Port on your XBMC Device. Be sure to set the boot loader sequence in your BIOS to choose the USB as the first boot option and then boot into the Installation Process. Wait for the Windows setup to kick in and you should see the familiar “Windows is loading files…” screen.
Continue your way through the Windows 7 installation process until your OS is setup. If your running WHS, skip down to the the “WHS Setup” section below. I personally would add the Windows 7 installation to my WHS prior to installing anything, and make incremental backups as we move along. (I will indicated this by using: [backup now]). Again, if your not using WHS, just ignore and move on.
Please Note:I chose “Automatic Updates” (For Windows Updates) during the installation process. I want this thing to –just do its thing- and not have to worry about maintaining it along with the rest of the machines on my network.
Disable Windows 7 Security
In order to have a straight boot to HTPC experience you will want to disable the login screen entirely. In order to do this follow these steps:
1. Win+R, to get the Run dialog
2. Enter in: “control userpasswords2” (no quotes), hit enter
3. Near the top of that dialog you will see a checkbox labeled:
Users must enter a user name and password to use this computer
Be sure that this is NOT CHECKED.
You will also need to disable User Account Control entirely, here’s how:
1. Win+R, to get the Run Dialog
2. Enter in: “UserAccountControlSettings”, (no quotes), hit enter
3. Use the Slider, and slide it all the way down to “Never notify”, and hit OK.
[8:30 PM]
[backup now]
(make sure you yank out your USB boot disk)
[reboot]
Installing XBMC
You can download the latest Stable Release via their download page, or try your luck with one of the Nightly Builds. I plan on using the latest nightly build, which is:
![[ ]](http://mirrors.xbmc.org/icons/win.gif)
xbmc-r28256-trunk.exe 01-Mar-2010 09:47 45M Mirrors Metalink
I chose one of the mirrors at random and was able to get about 1MB/s download. You may want to find which Mirror is best for you, given your location and ISP.
I chose all of the defaults for the actual installation of XBMC. Just hit Next all the way through. You should notice that the Visual C Runtime and the DirectX Installations do take a bit of time, so be patient.
Please Note: On my connection the DirectX Runtime takes about 45 seconds to download.
Once the product installs, give it a test run. Ensure it works.
[reboot]
[backup now]
Using your MCE Remote
The tool of choice for most installations on Windows, for IR remotes – Media Center Remote (MCE) is EventGhost (EG). From their Web Site…
What is EventGhost?
EventGhost is an advanced, easy to use and extensible automation tool for MS Windows. It can use different input devices like infrared or wireless remote controls to trigger macros, that on their part control a computer and its attached hardware. So it can be used to control a Media-PC with a normal consumer remote. But its possible uses go much beyond this.
The depth of support that it has around X10 is a huge bonus. What you will need to do is first install EG on the machine, and then download the MCE/XBMC Plug-in and then connect the XBMC actions with the events from your remote.
Plug-in your USB IR Dongle and allow Windows 7 to install the appropriate driver. Luckily my dongle was just found and installed with no issues at all. (Don't you just love Windows 7?)
Once you have your IR receiver installed, lets grab the latest revision of EG and install it. I chose:
EventGhost 0.3.7.r1436, 11.8 MB, Feb 11 2010
In the default install it created shortcut on my desktop, right click and choose properties, under the Compatibility Tab, be sure that “Run this program as an administrator” is Checked.
For me, in order to get XBMC working fine (it took much tinkering to get this right) I needed to first download the latest XBMC Plug-in for EG, here [direct link].
Replace the contents of “C:\Program Files\EventGhost\XBMC\” with the contents in that ZIP Package.
Launch EventGhost.
The easiest way for you to get started is to download my XML Configuration file, loaded it should resemble something like:
XML Configuration:
<?xml version="1.0" encoding="UTF-8" ?>
<EventGhost Name="Configuration Tree" Expanded="True" Version="1436" Guid="{64AFA530-ED43-42A4-AE5F-0BE6C6CF869E}" Time="1267587884.05">
<Autostart Name="Autostart" Expanded="True">
<Plugin File="Task" Identifier="Task">
gAIpLg==
</Plugin>
<Plugin File="MceRemote" Identifier="MceRemote">
gAJHP8MzMzMzMzOIhnEALg==
</Plugin>
<Action>
EventGhost.EnableItem(XmlIdLink(9))
</Action>
<Action>
System.Execute(u'C:\\Program Files\\XBMC\\XBMC.exe', u'', 2, False, 3, u'C:\\Program Files\\XBMC\\')
</Action>
<Action>
EventGhost.Wait(5.0)
</Action>
<Plugin File="XBMC" Identifier="XBMC">
gAIpLg==
</Plugin>
</Autostart>
<Folder Name="Keyboard Emulation" id="9" Expanded="True">
<Macro Name="Up">
<Event Name="Up" />
<Action>
Window.SendKeys(u'{Up}')
</Action>
<Action>
EventGhost.AutoRepeat(0.59999999999999998, 0.29999999999999999, 0.01, 3.0)
</Action>
</Macro>
<Macro Name="Down">
<Event Name="Down" />
<Action>
Window.SendKeys(u'{Down}')
</Action>
<Action>
EventGhost.AutoRepeat(0.59999999999999998, 0.29999999999999999, 0.01, 3.0)
</Action>
</Macro>
<Macro Name="Right">
<Event Name="Right" />
<Action>
Window.SendKeys(u'{Right}')
</Action>
<Action>
EventGhost.AutoRepeat(0.59999999999999998, 0.29999999999999999, 0.01, 3.0)
</Action>
</Macro>
<Macro Name="Left">
<Event Name="Left" />
<Action>
Window.SendKeys(u'{Left}')
</Action>
<Action>
EventGhost.AutoRepeat(0.59999999999999998, 0.29999999999999999, 0.01, 3.0)
</Action>
</Macro>
<Macro Name="Ok -> Enter Key">
<Event Name="Ok" />
<Action>
Window.SendKeys(u'{Enter}')
</Action>
</Macro>
<Macro Name="Delete -> Escape Key">
<Event Name="Delete" />
<Action>
Window.SendKeys(u'{Esc}')
</Action>
</Macro>
<Macro Name="Power -> Alt+F4">
<Event Name="Power" />
<Action>
Window.SendKeys(u'{Alt+F4}')
</Action>
</Macro>
<Macro Name="Forward -> Tabulator" Enabled="False">
<Event Name="Forward" />
<Action>
Window.SendKeys(u'{Tab}')
</Action>
</Macro>
<Macro Name="Rewind -> Shift+Tabulator" Enabled="False">
<Event Name="Rewind" />
<Action>
Window.SendKeys(u'{Shift+Tab}')
</Action>
</Macro>
<Macro Name="ChannelUp -> Plus" Enabled="False">
<Event Name="ChannelUp" />
<Action>
Window.SendKeys(u'+')
</Action>
</Macro>
<Macro Name="ChannelDown -> Minus" Enabled="False">
<Event Name="ChannelDown" />
<Action>
Window.SendKeys(u'-')
</Action>
</Macro>
<Macro Name="Rename -> Start Menu">
<Event Name="Rename" />
<Action>
Window.SendKeys(u'{Win}')
</Action>
</Macro>
<Macro Name="Play -> Space" Enabled="False">
<Event Name="Play" />
<Action>
Window.SendKeys(u'{Space}')
</Action>
</Macro>
</Folder>
<Folder Name="XBMC" Expanded="True">
<Macro Name="Up">
<Action>
XBMC.Up()
</Action>
</Macro>
<Macro Name="Down">
<Action>
XBMC.Down()
</Action>
</Macro>
<Macro Name="Left">
<Action>
XBMC.Left()
</Action>
</Macro>
<Macro Name="Right">
<Action>
XBMC.Right()
</Action>
</Macro>
<Macro Name="Page Up">
<Event Name="MceRemote.ChannelUp" />
<Action>
XBMC.PageUp()
</Action>
</Macro>
<Macro Name="Page Down">
<Event Name="MceRemote.ChannelDown" />
<Action>
XBMC.Page Down()
</Action>
</Macro>
<Macro Name="Select">
<Action>
XBMC.Select()
</Action>
</Macro>
<Macro Name="Back">
<Event Name="MceRemote.Back" />
<Action>
XBMC.Back()
</Action>
</Macro>
<Macro Name="Play" Expanded="True">
<Event Name="MceRemote.Play" />
<Action>
XBMC.Play()
</Action>
</Macro>
<Macro Name="Pause" Expanded="True">
<Event Name="MceRemote.Pause" />
<Action>
XBMC.Pause()
</Action>
</Macro>
<Macro Name="Stop" Expanded="True">
<Event Name="MceRemote.Stop" />
<Action>
XBMC.Stop()
</Action>
</Macro>
<Macro Name="Fast Forward" Expanded="True">
<Event Name="MceRemote.Forward" />
<Action>
XBMC.FastForward()
</Action>
</Macro>
<Macro Name="Rewind" Expanded="True">
<Event Name="MceRemote.Rewind" />
<Action>
XBMC.Rewind()
</Action>
</Macro>
<Macro Name="Skip Next" Expanded="True">
<Event Name="MceRemote.Skip" />
<Action>
XBMC.SkipNext()
</Action>
</Macro>
<Macro Name="Skip Previous" Expanded="True">
<Event Name="MceRemote.Replay" />
<Action>
XBMC.SkipPrevious()
</Action>
</Macro>
<Macro Name="Record">
<Action>
XBMC.Record()
</Action>
</Macro>
<Macro Name="Volume Up" Expanded="True">
<Action>
XBMC.VolumeUp()
</Action>
</Macro>
<Macro Name="Volume Down" Expanded="True">
<Action>
XBMC.VolumeDown()
</Action>
</Macro>
<Macro Name="Mute">
<Action>
XBMC.Mute()
</Action>
</Macro>
<Macro Name="Zero">
<Action>
XBMC.Zero()
</Action>
</Macro>
<Macro Name="One">
<Action>
XBMC.One()
</Action>
</Macro>
<Macro Name="Two">
<Action>
XBMC.Two()
</Action>
</Macro>
<Macro Name="Three">
<Action>
XBMC.Three()
</Action>
</Macro>
<Macro Name="Four">
<Action>
XBMC.Four()
</Action>
</Macro>
<Macro Name="Five">
<Action>
XBMC.Five()
</Action>
</Macro>
<Macro Name="Six">
<Action>
XBMC.Six()
</Action>
</Macro>
<Macro Name="Seven">
<Action>
XBMC.Seven()
</Action>
</Macro>
<Macro Name="Eight">
<Action>
XBMC.Eight()
</Action>
</Macro>
<Macro Name="Nine">
<Action>
XBMC.Nine()
</Action>
</Macro>
<Macro Name="Star">
<Action>
XBMC.Star()
</Action>
</Macro>
<Macro Name="Hash">
<Action>
XBMC.Hash()
</Action>
</Macro>
<Macro Name="Menu" Expanded="True">
<Event Name="MceRemote.DVDMenu" />
<Action>
XBMC.Menu()
</Action>
</Macro>
<Macro Name="Display" Expanded="True">
<Event Name="MceRemote.Guide" />
<Action>
XBMC.Display()
</Action>
</Macro>
<Macro Name="Start">
<Action>
XBMC.Start()
</Action>
</Macro>
<Macro Name="Title" Expanded="True">
<Event Name="MceRemote.Details" />
<Action>
XBMC.Title()
</Action>
</Macro>
<Macro Name="Info" Expanded="True">
<Event Name="MceRemote.Details" />
<Action>
XBMC.Info()
</Action>
</Macro>
<Macro Name="Clear">
<Action>
XBMC.Clear()
</Action>
</Macro>
<Macro Name="Power" Expanded="True">
<Action>
XBMC.Power()
</Action>
</Macro>
<Macro Name="Big Skip Backward">
<Action>
XBMC.BigSkipBackward()
</Action>
</Macro>
<Macro Name="Big Skip Forward">
<Action>
XBMC.BigSkipForward()
</Action>
</Macro>
<Macro Name="Small Skip Backward">
<Action>
XBMC.SmallSkipBackward()
</Action>
</Macro>
<Macro Name="Small Skip Forward">
<Action>
XBMC.SmallSkipForward()
</Action>
</Macro>
<Macro Name="Party Mode">
<Action>
XBMC.PartyMode()
</Action>
</Macro>
<Macro Name="Random">
<Action>
XBMC.Random()
</Action>
</Macro>
<Macro Name="Repeat">
<Action>
XBMC.Repeat()
</Action>
</Macro>
<Macro Name="Take Screen Shot">
<Action>
XBMC.TakeScreenShot()
</Action>
</Macro>
<Macro Name="Last FM Love">
<Action>
XBMC.LastFMLove()
</Action>
</Macro>
<Macro Name="Last FM Ban">
<Action>
XBMC.LastFMBan()
</Action>
</Macro>
<Macro Name="Eject Tray">
<Action>
XBMC.EjectTray()
</Action>
</Macro>
<Macro Name="Play DVD">
<Action>
XBMC.PlayDVD()
</Action>
</Macro>
<Macro Name="Update Video Library" Expanded="True">
<Event Name="MceRemote.Record" />
<Action>
XBMC.UpdateVideoLibrary()
</Action>
</Macro>
<Macro Name="Update Music Library">
<Action>
XBMC.UpdateMusicLibrary()
</Action>
</Macro>
<Macro Name="Show Home Screen" Expanded="True">
<Event Name="MceRemote.Start" />
<Action>
XBMC.Home()
</Action>
</Macro>
<Macro Name="Show Videos Screen" Expanded="True">
<Event Name="MceRemote.Videos" />
<Action>
XBMC.MyVideos()
</Action>
</Macro>
<Macro Name="Show Music Screen" Expanded="True">
<Event Name="MceRemote.Music" />
<Action>
XBMC.MyMusic()
</Action>
</Macro>
<Macro Name="Show Pictures Screen" Expanded="True">
<Event Name="MceRemote.Pictures" />
<Action>
XBMC.MyPictures()
</Action>
</Macro>
<Macro Name="Show Weather Screen">
<Action>
XBMC.Weather()
</Action>
</Macro>
<Macro Name="Show Settings Screen">
<Action>
XBMC.Settings()
</Action>
</Macro>
<Macro Name="Show Favorites Screen">
<Action>
XBMC.Favorites()
</Action>
</Macro>
<Macro Name="Show System Info Screen">
<Action>
XBMC.SystemInfo()
</Action>
</Macro>
<Macro Name="Show Shutdown Menu" Expanded="True">
<Action>
XBMC.ShutdownMenu()
</Action>
</Macro>
<Macro Name="Reset Computer">
<Action>
XBMC.Reset()
</Action>
</Macro>
</Folder>
</EventGhost>
Please Note: I tried numerous times to get the seemingly superior XBMCRepeat plugin to work with very little luck. If you find a tutorial out there which nails it down, please let me know!
Take time now to tweak the EventGhost setup for your specific Remote and needs. I personally had to disable a few of the Keyboard commands and remap a bunch of the XBMC Macros to the MCE Remote events. Its a pretty trivial process.
Navigate to the macro (for example under XBMC, Back), and then hit the button on the remote you want mapped to that command. It should pop up on the left (Log) area. Click and drag that under the XBMC/Back node. That essentially will wire up that event to that action. Its really as easy as that.
In order to test this out, right click the “Autostart” node, and choose “Execute”. That should launch XBMC, and then connect EventGhost with it, enabling your remote.
Getting XBMC and EG to Launch on Startup
In EG, to go to File, Options, and ensure that “Autostart EventGhost on system startup” is Checked.
Please Note: I added an Action to the “Autostart” node, the first of which is “Start Program” and point it to the XBMC.exe (in the Program Files folder). I also added a “Wait 5.0 sec” node as well. This will ensure that XBMC is fully launched so that when EventGhost initiates its connection XBMC is ready and waiting for it.
[backup]
[reboot]
[9:30PM]
Final assembly and testing
Lets take the few minutes to assemble the HTPC back to once piece and since I used an old school LCD (analog) monitor I need to actually jack into my living room television, and give the full 1080p video experience a try.
[10:00PM]
Optional : WHS Setup
This step is optional, and only recommended for those with a WHS rig in their home. In order to connect your XBMC/Win7 machine to the WHS machine you need to install the “Home Server Connector Software”. This should be available on your install media, or on the WHS itself, via a network share: \\WHS_IP_ADDRESS\software\Home Server Connector Software\. [Download the ISO from Microsoft]
Optional : AntiVirus
Given that I will be doing very little with this set top machine, and not that subject to viral infection I plan on simply turning off all AV notifications. If that causes an issue in the future I will probably install AVG Free.
More to come…
In future posts I plan on investigating integration other input and output devices such as…
- Bluetooth
- Be aware of who is in the room, could tweak the experience based on the audience?
- RFID (Phidgets)
- Launch pre-defined scripts/automation based on tags it reads. Setup my profile, or login to the machine?
- I could lock the machine until the RFID tag is found, a physical lock
- LCD (Phidgets).
- Output microbits of data like a twitter feed, now playing information, weather data, etc..
- Skype Integration
- To be able to notify on screen or via an X10 controlled light whenever an incoming call is happening
- Be able to use my remote control to answer, dial, redial a contact
- Full screen video chatting in the living room
- Live Web Camera Feeds
- Natively in XBMC I cannot view my MJPG based Wifi Cameras that I have installed around the house. I should be able to find a free monitoring solution based on Windows (via WHS) to handle this task with greater ease.
- Hot Keys for Application Switching
- I want to setup my remote to quickly and easily switch back and forth between XBMC, and other essential HTPC applications. EventGhost will handle this quite well.